产品中心
TTR500 系列矢量网络分析仪
产品概述和特点
技术参数
相关下载
Key performance specifications
100 kHz to 6 GHz frequency range
> 122 dB dynamic range
-50 to +7 dBm output power
< 0.008 dB RMS trace noise
Key features
Full 2-port 2-path S-parameter measurement (S11, S21, S12, S22) in a variety of formats.
Complete vector network analysis capability with Tektronix VectorVu-PC™ software.
Built-in bias tee accessible on both ports to bias active devices.
Application programming interface (API) for Microsoft Windows environment and LabView driver.
Robust SCPI command interface (compatible with current VNA models) to optimize code migration.
Touchstone file support (import/export) for use with Electronic Design Automation (EDA) simulation tools.
Offline simulation mode for analysis of S-parameter files when disconnected from the instrument.
Industry-leading three year warranty.
Applications
Antenna matching and tuning
RF component design and validation
Education
General
- Connectivity
- USB 2.0
- Software
- VectorVu-PC™ (requires Windows® 7/8/10, 64-bit)
Corrected system performance with calibration kit
- Spinner Type-N mechanical calibration kit BN533861
User Correction ON.
Two 60 cm Tektronix cables 012-1765-00 or 012-1768-00
- Spinner 3.5 mm mechanical calibration kit BN533854
User Correction ON.
Two 60 cm Tektronix cables 012-1769-00 or 012-1772-00
- Spinner Type-N calibration kit BN533844
User Correction ON.
Two 60 cm Tektronix cables 012-1765-00
Uncorrected system performance
- User correction OFF. Factory correction ON.
Frequency
- Range
- TTR503A
- 100 kHz to 3.0 GHz
- TTR506A
- 100 kHz to 6.0 GHz
- Resolution
- 1 Hz
- Accuracy
- ± 7.0 ppm over 1 year calibration interval, 18 °C to 28 °C
- Internal reference
- Frequency
- 10 MHz
- Initial accuracy
- ±10 Hz
Aging
- External reference input
- 10 MHz ± 50 Hz
Test port output
- Dynamic range
- Crosstalk with load
1After full 2-port SOLT calibration with isolation using a Spinner BN533861 Type-N 50 Ω load.
Dynamic accuracy and compression
- Dynamic accuracy
- Dynamic accuracy, typical-mean
- Test port compression at maximum input level
- Compression at +10 dBm input level (typical-mean) is > +5 to +10 dBm
- Trace noise 1, typical
1Measured in a 1 KHz IF BW, 10 dBm output power, thru connection
- Temperature stability 1, typical
1Measured in a 10 Hz IF BW, 0 dBm output power, thru connection
- Maximum receiver input level
Output level calibration
Connectors
- Front panel
- Rear panel
Power supply
VectorVu-PC™ software
- System requirements
Physical characteristics
Length: 11.25” (28.58 cm)
Width: 8.125” (20.64 cm)
Depth: 1.75” (4.45 cm)
Weight: 3.5 lbs. (1.59 kg)
Environmental and safety
- Temperature
Operating: +5 °C to +50 °C ( 41 °F to 122 °F)
Non-operating: -40 °C to 71 °C ( -40 °F to 159.8 °F)
- Humidity (operating)
5% to 80% ±5%RH (relative humidity) in the temperature range of +10 °C to 30 °C (+50 °F to 86 °F)
5% to 75% ±5%RH above +30 °C to 40 °C (+86 °F to 104 °F)
5% to 45% ±5%RH above +40 °C up to 50 °C (+104 °F to +122 °F)
Non-condensing
- Altitude
Operating: 5000 m (16,404 ft)
Non-operating: 15,240 m (50,000 ft)
- Dynamics
- Vibration
Operating: 0.31 GRMS: 5-500 Hz, 3 Axes at 10 min/axis
Non-operating: 2.46 GRMS: 5-500 Hz, 3 Axes at 10 min/axis
- Shock
Operating: Half-sine mechanical shocks, 30 g peak amplitude, 11 msec duration, 3 drops in each direction of each axis, 18 total
Non-operating: Half-sine mechanical shocks, 40 g peak amplitude, 11 msec duration, 3 drops in each direction of each axis, 18 total
- Handling and transit
Bench handling, operating: MIL-PRF-28800F Class 3
Transit drop, non-operating: MIL-PRF-28800F Class 2